Lab46. OSPF – Pindah Jalur

Posted: February 7, 2014 in Cisco, OSPF
Tags: , , ,

3 Router Config DasarDefault nya, kalau ospf dia ngeliat dari bandwith untuk menentukan jalur mana yang bakalan dia lewatin. . .

Nah logika nya pasti lewat bawah dong karena FastEthernet yang kecepatan nya 100.000.000 bps sedangkan kalo serial hanya 1.500.000 bps. . .

trace ke 3

Nah cara biar lewat serial gimana ?

Ganti aja bandwith di FastEthernet nya jadi di bawah serial

Caranya ?

Gene. . .

R1(config)#int f0/0
R1(config-if)#bandwidth 1000
R1#clear ip ospf process

Coba cek lagi. .

lewat r2 dlu

Nah kan jadi lewat R2 dlu dia soal nya Bandwith pada F0/0 udah lebih kecil daripada Serial 0/0

Okee ?

Masih bingung ?

Coba cek konfig keseluruhan nya😀

R1

interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface FastEthernet0/0
 bandwidth 1000
ip address 13.13.13.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0
ip address 12.12.12.1 255.255.255.0
clock rate 2000000
!

R2

interface Loopback0
ip address 2.2.2.2 255.255.255.255
!
interface FastEthernet0/0
ip address 23.23.23.2 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0
ip address 12.12.12.2 255.255.255.0
clock rate 2000000
!
router ospf 2
router-id 2.2.2.2
log-adjacency-changes
network 0.0.0.0 255.255.255.255 area 0

R3

interface Loopback0
ip address 3.3.3.3 255.255.255.255
!
interface FastEthernet0/0
ip address 13.13.13.3 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 23.23.23.3 255.255.255.0
duplex auto
speed auto
!
router ospf 3
router-id 3.3.3.3
log-adjacency-changes
network 0.0.0.0 255.255.255.255 area 0

Feel Free to Ask🙂

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s