Lab 3. EIGRP – Filtering – Distribute List

Posted: January 27, 2014 in Cisco, EIGRP
Tags: , , , ,

Nah sekarang mulai main filter2an nih. . .
Jadi yang lab sebelum nya yang config EIGRP dasar Lab1. EIGRP – Konsep Dasar

Nah sekarang kita mulai memfilter, contoh nya IP Loopback R2 gak boleh ada dalam routing tabel Router R1, nah kalo mau filter nya pake config distribute-list. . .

R1#sh ip route

R1(config)#access-list 1 deny 2.2.2.2
R1(config)#access-list 1 permit any
R1(config-router)#distribute-list 1 in s0/0

 

Kalo udah coba cek routing table nya. . .

1.0.0.0/32 is subnetted, 1 subnets
C       1.1.1.1 is directly connected, Loopback0
3.0.0.0/32 is subnetted, 1 subnets
D       3.3.3.3 [90/2323456] via 12.12.12.2, 00:36:01, Serial0/0
23.0.0.0/24 is subnetted, 1 subnets
D       23.23.23.0 [90/2195456] via 12.12.12.2, 00:36:06, Serial0/0
12.0.0.0/24 is subnetted, 1 subnets
C       12.12.12.0 is directly connected, Serial0/0

Sep udah gak ada loopback R2 nya. Bisa juga dikonfigurasiin di R2 tapi direction Out bukan In.

Hapus dulu konfigurasi di Router R1

R1(config-router)#no distribute-list 1 in s0/0

Konfigurasi di R2 nya sekarang. . .

R2(config)#access-list 1 deny 2.2.2.2
R2(config)#access-list 1 permit any
R2(config)#router eigrp 10
R2(config-router)#distribute-list 1 out s0/0

Pic setelah di distribute :

Distribute-List

Okeee next tutorial sabar eaaakkk. . .

😀

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s